- Fully insulated machine
- Refill signal for detergent and rinse aid
- Nominal capacity up to 30 cycles/h
- Heating optionally with electricity, hot water or gas
- USB-interface for comfortable download of operational data
- Blocked filter sensor
- Special hygiene programme to remove dirt deposits and limescale deposits
- Completely equipped with: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer
- ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
- VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display
- POWER wash: high-pressure washing to wash heavily soiled wash items
- Made in Germany
- Ergonomic handling with supply and unloading tables next to the system
- Optional drain water and exhaust heat recovery systems additionally reduce the operating costs
- Intelligent energy management - the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
- Water bottle filling system for optimum filling of the bottles immediately after cleaning
- Manual, semi-automatic or automatic uncapping unit can be installed before the cleaning system
Technical data
Cycle times* | Depending on specification |
Throughput | Depending on specification |
Wash ware | Cages, cage lid, water bottles, aquaria, wire grids |
Contamination | Bedding, excretions, salvia, proteins, algae and bio films |
Outside dimensions (W x D x H) (with closed door) | 1375 x 945 x 1984 mm |
Loading height | 650 mm, extendible to 860 mm |
Rack size | 1,240 x 700 mm |
Wash and rinse temperature | 60 - 85 °C |
*Thermostop guarantees required temperatures with cold water connection, the actual cycle times extend accordingly. For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a water softener of the product line HYDROLINE PROTECT.
- Osmosis system
Minerals and salts are removed from the water to provide stainless cleaning results. - Uncapping unit
To uncap the water bottles, a manual, semi-automatic or automatic uncapping unit can be installed before the cleaning system. - Water bottle filling device
The swivelling filling rake permits 18 or 36 water bottles to be filled simultaneously after cleaning. When it is not used, it can be turned towards the splash protection wall to save space. - Drain heat recovery
The drain heat recovery system permits the energy, that is stored in the form of heat in the waste water, to be fed back into the cleaning system. It is thus not lost. - Exhaust heat recovery
The fresh water is heated with the energy from the waste steam, thus reducing the energy required for reaching the rinse temperature by up to 7.8 kWh.